Software User's Guide
Table Of Contents
- SOFTWARE USER’S GUIDE Label Printer TD-series
- Introduction
- Table of Contents
- 1 Installing and Uninstalling P-touch Editor and P-touch Update Software
- 2 Customizing Labels
- 3 Creating Labels
- 4 How to Use P-touch Editor
- 5 How to use P-touch Transfer Manager & P-touch Library
- Using P-touch Transfer Manager
- Transferring the label template to P-touch Transfer Manager
- Starting P-touch Transfer Manager
- Transferring templates or other data from the computer to the printer via USB
- Transfer the templates to the printer via network (TD-2120N/2130N/4100N only)
- Backing up templates or other data saved in the printer
- Deleting all the printer data
- Using P-touch Library
- Using P-touch Transfer Manager
- 6 Transferring label templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the label template to P-touch Transfer Manager
- Saving the label template as a Transfer Package file (.pdz)
- Distributing the Transfer Package file (.pdz) and P-touch Transfer Express to the user
- Transferring the Transfer Package file (.pdz) to Brother printer
- 7 Printing the list of label templates
- 8 Printing labels using P-touch Template
- 9 Updating P-touch Editor (all models) / Updating the Firmware (TD-2020/2120N/2130N only)
- 10 Printing labels distributed to multiple printers
- Appendix
- brother US ENG
Printing labels using P-touch Template
61
8
Preparation 8
Before connecting the barcode reader to this printer, specify barcode reader settings and the settings in the
P-touch Template Settings tool.
Specifying settings in the P-touch Template Settings tool 8
a Download the P-touch Template Settings tool at the specified URL, and then run P-touch Template
Settings.exe.
http://solutions.brother.com/
Click a product below [Choose your product], click [Downloads], click an operating system below
[Select OS], click [Utilities], and then download [P-touch Template Settings].
NOTE
TD-2120/2120N/2130N are provided with the “Printer Setting Tool”, which can be installed from the
included CD-ROM. Start the “Printer Setting Tool”, and then click the [P-touch Template Settings]
button. For details, see the User’s Guide included on the CD-ROM.
b Select the appropriate settings, and then click the [Set] button.
NOTE
As a default setting, printing will begin when the code “^FF” is read with the barcode reader. (This can be
changed with the settings at A.)
If [Received Data Size] is selected and the number of bytes is specified, printing will begin automatically
after barcodes for the specified number of bytes are scanned. If printing is performed from the computer
after selecting this setting, the parameter will return to the default setting mentioned above. After printing
from the computer, change the settings again.
A
B