P-touch Template Manual/ Command Reference
Table Of Contents
- P-Touch Template Manualv
- P-Touch Template Command Referencev
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- If a template linked to a database is not printed
- Control Command Details
- ^PT Specify print start trigger selection
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^CO Specify machine settings (cut options)
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^NN Specify number of Numbering copies
- ^ID Initialize template data
- ^QS Specify print options
- ^QV Specify QR code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform machine operation (feed/cut)
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXc2 Specify machine settings (cut options)
- ESC iXy2 Specify machine settings (cut options–specify cutting after a number of labels)
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXN2 Specify number of Numbering copies
- ESC iXF2 FNC1 replacement setting
- ESC iXq2 Specify print options
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXc1 Retrieves machine settings (cut options)
- ESC iXy1 Retrieve machine settings (cut options–specify cutting after a number of labels)
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- ESC iXN1 Retrieve number of Numbering copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXq1 Retrieve print options
- International character set table
ESC iXc2 Specify machine settings (cut options)
[ASCII] ESC i X c 2 n1 n2 n3
[Decimal] 27 105 88 99 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 63 32 nh1 nh2 nh3
[Parameters] nh1:01h (Fixed)
nh2:00h (Fixed)
nh3:00h 01h 08h 09h
[Description]
・Specifies the various cut options.
nh3=00h: No cutting
nh3=01h: Automatically cuts
nh3=08h: Cut at end turned on
nh3=09h: Auto cutting turned on, and cut at end turned on
・This command is a static command.
[Example]
・To specify auto cutting:
ESC i X c 2 01h 00h 01h
(1Bh 69h 58h 63h 32h 01h 00h 01h)
39