P-touch Template Manual/ Command Reference
Table Of Contents
- P-Touch Template Manualv
- P-Touch Template Command Referencev
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- If a template linked to a database is not printed
- Control Command Details
- ^PT Specify print start trigger selection
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^CO Specify machine settings (cut options)
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^NN Specify number of Numbering copies
- ^ID Initialize template data
- ^QS Specify print options
- ^QV Specify QR code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform machine operation (feed/cut)
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXc2 Specify machine settings (cut options)
- ESC iXy2 Specify machine settings (cut options–specify cutting after a number of labels)
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXN2 Specify number of Numbering copies
- ESC iXF2 FNC1 replacement setting
- ESC iXq2 Specify print options
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXc1 Retrieves machine settings (cut options)
- ESC iXy1 Retrieve machine settings (cut options–specify cutting after a number of labels)
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- ESC iXN1 Retrieve number of Numbering copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXq1 Retrieve print options
- International character set table
Introduction:
This material provides the necessary information for directly controlling the transferred
templates in TD-4000/4100N.
This information is provided assuming that the user has full understanding of the operating
system being used and basic mastery of RS-232C in a developer's environment.
We accept no responsibility for any problems caused by programs that you develop using
the information provided in this material, affecting software, data or hardware, including the
TD-4000/4100N, and any problems resulting directly or indirectly from them. Use this
material only if you accept these terms.
This material shall not be reproduced, in part or in full, without prior approval. In addition,
this material shall not be used as evidence in a lawsuit or dispute in a way that is
unfavorable towards our company.
1
.
S
ett
i
ng up t
h
e pr
i
nter
through your PC,
in accordance with the
host device.
What is P-touch Template?
P-touch Template is the tool to transfer the ASCII
text & binary data from host device to transferred
template in the machine. Such transferred data
is inserted into text object or barcode object in a
template.
3
.
T
rans
f
er t
h
e
d
ata
(Text) from host, and
print template.
2. Design the template
by P-touch Editor, and
transfer it to printer.
It help
s the user develop the printing system which connects directly from host device.
The types of host device are as below.
Scale, Measurement device
Medical device
Barcode reader
Control device and any system environment
Notes:
*P-touch Template is available only for TD-4000/4100N.
*Host should have serial cable to transfer the data.
4