P-touch Template Manual/ Command Reference

Control Code List
Commands that can be set or obtained in P-touch Template mode
^PT 5E 50 54
Dynamic
Select print start trigger
^FF 5E 46 46 Start printing
^PS 5E 50 53
Dynamic
Specify print start command text string
^PC 5E 50 43
Dynamic
Specify print start received character count
^SS 5E 53 53
Dynamic
Specify delimiter
^TS 5E 54 53
Dynamic
Select template
^CO 5E 43 4F
Dynamic
Specify machine settings (cut options
ON/OFF)
^LS 5E 4C 53
Dynamic
Specify line spacing with line return
^CC 5E 43 43
Dynamic
Change prefix character
^RC 5E 52 43
Dynamic
Specify line return command text string
^CN 5E 43 4E
Dynamic
Specify number of copies
^NN 5E 4E 4E
Dynamic
Specify number of Numbering copies
^ID 5E 49 44 Initialize template data
^QS 5E 51 53
Dynamic
Specify print options
^QV 5E 51 56
Dynamic
Specify QR code version
^FC 5E 46 43
Dynamic
FNC1 replacement setting
^II 5E 49 49 Initialize
^OP 5E 4F 50 Perform machine operation (feed/cut)
^SR 5E 53 52 Status request
^VR 5E 56 52 Retrieve version Information
^CR 5E 43 52 Line return in object
^OS 5E 4F 53 Specify object selection (object number)
^ON 5E 4F 4E Specify object selection (object name)
^DI 5E 44 49 Direct object insertion
ESC ia 1B 69 61
Dynamic
Specify command mode
* The commands mentioned above must be used in P-touch Template mode.
They cannot be used in raster mode or ESC/P mode. (except ESC ia)
4