P-touch Template Manual/ Command Reference
Table Of Contents
- P-Touch Template Manualv
- P-Touch Template Command Referencev
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- If a template linked to a database is not printed
- Control Command Details
- ^PT Specify print start trigger selection
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^CO Specify machine settings (cut options)
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^NN Specify number of Numbering copies
- ^ID Initialize template data
- ^QS Specify print options
- ^QV Specify QR code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform machine operation (feed/cut)
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXc2 Specify machine settings (cut options)
- ESC iXy2 Specify machine settings (cut options–specify cutting after a number of labels)
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXN2 Specify number of Numbering copies
- ESC iXF2 FNC1 replacement setting
- ESC iXq2 Specify print options
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXc1 Retrieves machine settings (cut options)
- ESC iXy1 Retrieve machine settings (cut options–specify cutting after a number of labels)
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- ESC iXN1 Retrieve number of Numbering copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXq1 Retrieve print options
- International character set table
Appendix: Specifications
BROTHER TD-4000/4100N P-touch Template specifications
Printing method Raster printing (PTCBP mode)
ESC/P printing
P-touch Template printing
Maximum Print Length 1 meter
Resolution (dpi) 300 dpi × 300 dpi
Font
Bitmap fonts: Helsinki, Brussels, Letter Gothic Bold
Outline fonts: Helsinki, Brussels, Letter Gothic
Size (dots) Bitmap fonts: 24 x 24, 32 x 32 (dots)
Outline fonts: 33 - 400 dot (22sizes)
Character style None, Bold, Italics, Outline, Shadow, Shadow + Outline
Underline Off, On
Character width -
Horizontal
alignment
Left, Center, Right
Tex t
Rotate Portrait, landscape
Protocols *1 CODE39, ITF(I-2/5), EAN-13, EAN-8, UPC-A, UPC-E, CODABAR,
CODE128, GS1-128(UCC/EAN-128), QR Code, PDF417, Data Matrix,
MaxiCode, RSS-14(Standard, Truncated, Stacked, Stacked Omni),
RSS-Limited, RSS Expanded(Standard, Stacked)
Bar code
Width Large, Medium, Small, Extra Small
Baud rate (bps) 115.2k, 57.6k, 9600
Busy DTR, Xon/Xoff
Bit length 8, 7
Parity NONE, ODD, EVEN
RS
Stop bit 1 bit
Printin
g
Transmission
Settings that appear in bold and are underlined are the default settings.
*1 BarStar Pro Encode Library (DataMatrix, MaxiCode, PDF417, RSS) Copyright © 2007 AINIX Corporation.
All rights reserved.
QR Code is registered trademark of DENSO WAVE INCORPORATED in JAPAN and other countries.
QR Code Generating Program Copyright © 2008 DENSO WAVE INCORPORATED
20