P-touch Template Manual/ Command Reference
Table Of Contents
- P-Touch Template Manualv
- P-Touch Template Command Referencev
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- If a template linked to a database is not printed
- Control Command Details
- ^PT Specify print start trigger selection
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^CO Specify machine settings (cut options)
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^NN Specify number of Numbering copies
- ^ID Initialize template data
- ^QS Specify print options
- ^QV Specify QR code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform machine operation (feed/cut)
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXc2 Specify machine settings (cut options)
- ESC iXy2 Specify machine settings (cut options–specify cutting after a number of labels)
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXN2 Specify number of Numbering copies
- ESC iXF2 FNC1 replacement setting
- ESC iXq2 Specify print options
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXc1 Retrieves machine settings (cut options)
- ESC iXy1 Retrieve machine settings (cut options–specify cutting after a number of labels)
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- ESC iXN1 Retrieve number of Numbering copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXq1 Retrieve print options
- International character set table
・The joini
ng setting specified in P-touch Editor is invalid.
・Macro settings specified in P-touch Editor are invalid.
● Maxi Code
・The link setting specified in P-touch Editor is invalid. It is linked when too much data is
entered.
・When specifying the country code and service class with P-touch Editor, the number is
entered at the beginning if the maximum number of characters is not reached. However,
with the main unit, the number is entered at the end.
Example: “2” is specified. P-touch Editor: “200”; Main unit: “002”
■ Relating to images
・If a template containing overlapping images is transferred with P-touch Editor, all image
data will be overlapping. (P-touch Editor displays the image created last on top.)
■ Relating to databases
・When a database is transferred, it is named using the file name + sheet name (when
created in Excel).
The file name can contain up to 15 bytes of characters (15 one-byte characters or 7
two-byte characters).
・A maximum of 99 databases can be transferred. However, the transfer cannot be
completed if the amount of data being transferred exceeds 2,048 KB.
・If there is a line feed in a cell containing text to be replaced, only the string of characters
before the line feed will be replaced.
・The text to be replaced can contain up to 256 characters.
・A database can contain a maximum of 65,000 rows.
If a database containing more than 65,000 rows is transferred, all data after the 65,000th
row will be deleted.
・A database can contain a maximum of 100 columns.
If a database containing more than 100 columns is transferred, all data after the 100th
column will be deleted.
・If there is no database linked to the template being printed, or if the corresponding string
of characters to be replaced cannot be found, an error occurs.
・If columns linked to the template being printed are not in the database, the objects
related to those columns remain as they were when the template was transferred.
17