P-touch Template Manual/ Command Reference
Table Of Contents
- P-Touch Template Manualv
- P-Touch Template Command Referencev
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- If a template linked to a database is not printed
- Control Command Details
- ^PT Specify print start trigger selection
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^CO Specify machine settings (cut options)
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^NN Specify number of Numbering copies
- ^ID Initialize template data
- ^QS Specify print options
- ^QV Specify QR code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform machine operation (feed/cut)
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXc2 Specify machine settings (cut options)
- ESC iXy2 Specify machine settings (cut options–specify cutting after a number of labels)
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXN2 Specify number of Numbering copies
- ESC iXF2 FNC1 replacement setting
- ESC iXq2 Specify print options
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXc1 Retrieves machine settings (cut options)
- ESC iXy1 Retrieve machine settings (cut options–specify cutting after a number of labels)
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- ESC iXN1 Retrieve number of Numbering copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXq1 Retrieve print options
- International character set table
⑱Communication settings
Settings can be specified for the following parameters for serial communication.
・ Baud rate
115200 bps, 57600 bps, 38400 bps, 31250 bps,
28800 bps, 19200 bps, 14400 bps, 9600 bps,
4800 bps, 2400 bps, 1200 bps, 600 bps, 300 bps
・ Bit length (bits)
8 bits, 7 bits
・ Parity
None, Odd, Even
・ Busy control
DTR, XON/XOFF
Applies the four settings to the machine.
Closes the Communication Settings
dialog box.
Returns the four parameters to their
default settings.
Others
・ ini file
After the [Set] button (in the main dialog box or the Communications Settings dialog box)
is clicked, the settings are saved when the dialog box is closed.
(With TD-4000)
C:\Documents and Settings\(user_account_name)\Application Data\Brother
\Printer Settings\Pts3135.ini
(With TD-4100N)
C:\Documents and Settings\(user_account_name)\Application Data\Brother
\Printer Settings\Pts3235.ini
・ Typing text into text boxes ③, ⑤, ⑨ and ⑩
Characters that can be entered as text can be typed in, and control codes can be entered
as ASCII codes (00 to FF) with \ in front of them.
Example: PRINT: [PRINT]
TAB control code: [\09]
Return control code: [\0D]
\: [\\]
10