ESC/ P Command Reference

ESC i D 2D bar code DataMatrix control
[ASCII] ESC I D or d data
[Decimal] 27 105 68 or 100 data
[Hexadecimal] 1B 69 44 or 64 data
・ Format
ESC i D or d [Parameters] [Bar code data]
\\\
1 2 3
① Parameters
Unlike with 1D bar codes, it is necessary to specify all parameters from the top down.
If a value other than those listed is entered for a parameter, that parameter is set to its
default value.
80
1. C
ell size
[Decimal 1 byte] 3
[Decimal 1 byte] 4
[Decimal 1 byte] 5
[Decimal 1 byte] 6
[Decimal 1 byte] 8
[Decimal 1 byte] 10
Set the dot size per cell side.
Prints 3 dots per cell side. (default value)
Prints 4 dots per cell side.
Prints 5 dots per cell side.
Prints 6 dots per cell side.
Prints 8 dots per cell side.
Prints 10 dots per cell side.
2. Symbol type
[Decimal 1 byte] 0
[Decimal 1 byte] 1
ECC200 square (default value)
ECC200 rectangular
3. Vertical size
[Decimal 1 byte] 0
[Decimal 1 byte] 10
[Decimal 1 byte] 12
[Decimal 1 byte] 14
[Decimal 1 byte] 16
[Decimal 1 byte] 18
[Decimal 1 byte] 20
[Decimal 1 byte] 22
[Decimal 1 byte] 24
[Decimal 1 byte] 26
[Decimal 1 byte] 32
[Decimal 1 byte] 36
[Decimal 1 byte] 40
[Decimal 1 byte] 44
[Decimal 1 byte] 48
[Decimal 1 byte] 52
[Decimal 1 byte] 64
[Decimal 1 byte] 72
[Decimal 1 byte] 80
[Decimal 1 byte] 88
[Decimal 1 byte] 96
● ECC200 square
Vertical no. of cells: AUTO (default value)
Vertical no. of cells: 10 cells
Vertical no. of cells: 12 cells
Vertical no. of cells: 14 cells
Vertical no. of cells: 16 cells
Vertical no. of cells: 18 cells
Vertical no. of cells: 20 cells
Vertical no. of cells: 22 cells
Vertical no. of cells: 24 cells
Vertical no. of cells: 26 cells
Vertical no. of cells: 32 cells
Vertical no. of cells: 36 cells
Vertical no. of cells: 40 cells
Vertical no. of cells: 44 cells
Vertical no. of cells: 48 cells
Vertical no. of cells: 52 cells
Vertical no. of cells: 64 cells
Vertical no. of cells: 72 cells
Vertical no. of cells: 80 cells
Vertical no. of cells: 88 cells
Vertical no. of cells: 96 cells