Quick Setup Guide (Touch Panel Display)

14
1
[ ] (admin key) can be accessed only when touch panel A (basic control panel) is set.
2
This function is available with firmware version 1.04 or later.
The newest version can be downloaded from the support website (Brother Solutions Center).
http://support.brother.com/
NOTE
• Some settings may differ depending on the firmware (printer software).
• A password can be specified so that basic settings specified by pressing [ ] (admin key)
cannot easily be accessed. For details on specifying the settings, see the User’s Guide
included on the CD-ROM.
• If you do not remember the password, use [Device settings] in the “Printer Setting Tool” to
return all settings to their factory defaults or specify the password again and apply it. For
details, see the User’s Guide included on the CD-ROM.
• If you want to reset the settings, use [Device settings] in the “Printer Setting Tool” to return
all settings to their factory defaults. For details, see the User’s Guide included on the CD-ROM.
(admin
key)
1
(Continued)
Security Disable
Edit
On/Off Select whether or not label
layouts can be edited.
Lock
Settings
On/Off Allow or disable setting changes
for [ ] (settings key).
Admin
Password
On/Off
Set password access for [ ]
(admin key).
Enter Password:
**** (4 digits)
Type in the 4-digit password.
Configuration Printer/ProgVer/
FontVer/Memory
Displays the model name,
firmware version, font version
and amount of built-in memory.
Key Parameter Settings Description