Owner's Manual

Programmer
81
Chapter 2 Programming with Help Function
6. Select with and press .
7. Move the work clamp with . Press
when the needle point is at given point
C.
8. Press

ESCESC
.
2
Inputting the end code
1. Select with and press .
2. Select the end code type with
and
press
.
"111" is selected in the example. Press and the work clamp
returns to the first stitch (point A).
3. Press

ESCESC
.
The work clamp returns to the home position.
3
Saving
1. Select with and press .
2. Select
with and press .
3. Input the data number and press
.