Owner's Manual

Programmer
162
Chapter 3 Programming with Command Function
Creating a curve
Command to be used
M
Input the stitch length in .
Example Pitch Input
0.5mm 005
12.0mm 120
L
7
8 9
This command represents completing creation of a curve.
Increase the number of plotting points to create a smoother curve.
One to 99 points are available for plotting.
1. Select the start point with and press
L
.
2. Input the stitch length in 3 digits and press
M
.
3. Move the needle with and press
L
.
4. Input
L
7
8 9
at the end position of the needle.