Owner's Manual

Programmer
107
Chapter 2 Programming with Help Function
Checking the program setting and
setting attribute
Checking the program setting and setting attribute
The following items are displayed.
End code
Current needle position/Total stitch count
Distance from the previous position in the X and Y axial directions
Stitch data type and availability of the option output,
Displayed at points where stitch is set.
low-speed sewing(*)
Feed data type and availability of the option output, Displayed at points where feed data
with/without thread is set.
Needle stop position of the split data (*) Displayed at points where split data is set.
Extended option output no. of the trigger data and
Displayed at points where trigger is set.
with/without machine stoppage (*)
Attribute of items marked with * are available for setting.
An example of stitch data is shown below.
1. Select or and press .
Selecting from the main menu
Selecting from the data programming menu
Stitch data type
Option output
present/absent
Slow conversion
End code
Current stitch count
Total stitch count
Distance from the previous point in
the direction of X or Y axis