Owner's Manual

15. Options
58
BAS-343E
15. Option
■ Programmer assy Used to create sewing patterns for the BAS-300E series.
It can also be used to display error messages.
■ Milling device This device can be used to cut a variety of objects such
as grooves, holes, and outline shapes in plastic or alumi-
num sheets.
■ WP stitch device Increases the stitch creation range for perfect stitches.
■ Auto bobbin changer When the amount of bobbin thread remaining becomes
low, this device automatically replaces the bobbin. This
reduces the need for tasks such as checking the amount
of bobbin thread remaining and replacing bobbins, so that
productivity can be increased.
■ Needle thread presser device This allows the upper thread to be securely placed under
the material for the first stitch at the sewing start.
■ Thread breakage detector device Available as rotary type or fiber type, stops sewing when
a thread breakage is detected and warns the operator.
■ Play prevention work clamp This work clamp prevents any play from occurring in the
clamp.
■ Thread wiper the side Wipes the upper thread away to the side when an inner
clamping device is being used.
■ 2-step thread tension device Allows the upper thread tension to be switched between
two settings at any position desired by using the program-
mer.
* Refer to the separate Parts Book for details.