Owner's Manual

11. Changing special functions using the memory switches
46
BAS-343E
11. Changing special functions using the memory switches
The functions of the switches on the operation panel can be changed to carry out special functions.
* All of the memory switches are set to OFF at the time of shipment.
NOTE
The following are special uses. All of the memory switch is usually set to OFF.
1. Turn on the power switch.
2. While pressing the TEST switch q, press the STEP BACK switch w to switch to setting mode.
3. Press the program select switch r so that the number displayed on the display screen e matches the switch
number (00 - 3F) for the function that you would like to select from the table.
4. Press the STEP BACK switch w to switch the setting appearing in the display screen t from OFF to ON.
If pressed once more:
■ If the B.T. CHANGE switch y is pressed at this time, all memory switch settings will be changed to OFF.
5. Press the TEST switch q. The display will return to normal.
プログラムNO.
PROGRAM NO.
PROGRAM NO.
メニュー
MENU
下糸カウンタ ー 
B.T. COUNTER
スプリット NＯ.
SPLIT NＯ.
横倍率
X
-
SCALE
縦倍率
Y
-
SCALE
スピ ー ド
SPEED
読/書
R / W
BAS-300E series
電 源
POWER
テスト
TEST
ステッ
テッ
プバック
STEP BACK

下糸設定
B
. T. SET
下糸交換
B.
B.
T. CHANGE
. CHANGE
r
e
t
q
y
w