Owner's Manual

10. DIP switch
45
BAS-343E
■ DIP switch D
SW No.
D - 1
D - 2
D - 3
D - 4
D - 5
D - 6
D - 7
D - 8
When ON
The first two stitches at the sewing start will be sewn at low speed (approx. 260 rpm)
The last two stitches at the sewing end will be sewn at low speed (approx. 260 rpm)
−
The last two stitches at the sewing end will be sewn at low speed (approx. 700 rpm)
−
Slow-speed sewing at the sewing start will be canceled
When the upper shaft is stopped, the motor will change direction and the needle bar will return to the
vicinity of the needle up stop position
During an emergency stop, the thread is trimmed and the needle bar stops in the raised position.