Owner's Manual

10. DIP switch
44
BAS-343E
10-2. DIP switches inside the control box
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the
wall outlet before opening the face plate of the control box. Touching areas where high voltages are
present can result in severe injury.
DANGER
■ DIP switch C
C - 1
−
ON
−
ON
−
ON
−
ON
C - 2
−
−
ON
ON
−
−
ON
ON
C - 3
−
−
−
−
ON
ON
ON
ON
Model setting
BAS-311E
BAS-326E
BAS-343E
BAS-341E
BAS-342E
BAS-311EL
SW No.
C - 4
C - 5
C - 6
C - 7
C - 8
When ON
Controlled sewing area becomes 1200 mm × 400 mm
For pneumatic type, set to ON when the connection has been changed so that the work clamp remains raised when the power is turned off.
−
−
−
Main circuit board