Owner's Manual

10. DIP switch
42
BAS-343E
10. DIP switch
NOTE
When changing DIP switch, the power must be off.
10-1.Panel DIP switch functions
■ DIP switch A
• Various setting combinations for DIP switch No. 2, No. 3 and No. 4 can be used to change the way the work clamp
is raised and lowered.
• The operation mode can be changed using the two-stage work clamp switch.
* For the BAS-343E, set only(A-4 to ON.
SW No.
A - 1
When ON
After sewing is finished, the cassette is not ejected automatically, but it is ejected when the work
clamp pedal is depressed.