Owner's Manual

9. Standard adjutsments

BAS-343E

2. Remove the movable knife, and replace it with a new movable knife. Now check the cutting edge of the movable

knife o and the fixed knife !0. If necessary, use the provided movable knife washer (T=0.4, T=0.5, T=0.6) to adjust

the knives so that they cut properly.

NOTE:

A. After the movable knife and fixed knife are properly engaged, tighten the screw.

B. Turn the movable knife (in the direction of the arrow) while the screw is still tightened.

C. Loosen the screw.

D. Turn the movable knife (in the direction of the arrow) while the screw is still loosened.

Repeat above steps A, B, C and D four or five times to maintain the cutting performance of the knife.

3. Install the fixed knife !0 0.5 mm away from needle hole

plate !1.

ABCD

Knives

0.5 mm

Movable knife

washer

Fix knife

Movable knife

Knives

With knives engaged

Knives