Owner's Manual

BAS-343E

3. Preparation

Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a

serious electric shock.

DANGER

■ Connection method for 3-phase power supply

3-4. Connecting the ground wire

3-6. Installing the foot switch

Insert the connector of the foot switch w into the connec-

tor e of the control box q.

3-5. V-belt tension

These should approximately 10 - 12 mm of slack when V-

belt is loaded at 9.8 N (1 kgf). To adjust, loosen the two

nuts q, and shift the motor up or down.

9.8 N

10 - 12 mm

Red

3-phase

power supply

White

Black

Yellow/Green

......... Connect to ground