Service manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION

2-2

2. UNPACKING

When unpacking the machine, check to see that all of the following components are included

in the carton.

Quick Setup Guide

CD-ROMs

For Windows (1 piece)

For Macintosh (1 piece)

User's Guide

ADF Support

Drum Unit Assembly

AC Power Cord

Telephone

Line Cord

Test Sheet

(U.S.A. only)

(U.S.A./Canada only)

(including Toner Cartridge)

Accessory Order Form

1. Control Panel

2. Face-down Output Tray

Support Flap (Support Flap)

3. Manual Feed Tray

(For MFC-8420, DCP-8020)

Multi-purpose Tray (MP Tray)

(For MFC-8820D/8820DN, DCP-8025D/8025DN)

4. Paper Tray

5. Front Cover

6. Power Switch

7. Document Cover

8. Automatic Document Feeder (ADF)

MFC

Fig. 2-1

Carton components may differ from one country to another.

Save all packing materials and the carton.

NOTE:

• The interface cable is not a standard accessory. Please purchase the appropriate

interface cable for the interface you intend to use (Parallel or USB).

• For Parallel use a bi-directional shield interface cable that is IEEE 1284-compliant, and not

longer than 6 feet (2 meters).

• For USB: use a Hi-Speed USB 2.0 interface cable that is not longer than 6 feet (2 meters).

• Please make sure that you use a Hi-Speed USB 2.0 certified cable if your computer uses

a Hi-Speed USB 2.0 interface.

• Even if your computer has a USB 1.1 interface, you can connect the machine.