Service manual

APPENDIX 3 FIRMWARE SWITCHS (WSW)

A-32

WSW27 (Function setting 5)

Selector

No.

Function Setting and Specifications

1 Not used.

2 Ringer OFF setting 0: Yes 1: No

3 Not used.

Detection of distinctive ringing

pattern

0: No 1: Yes

Not used.

8 Not used. 0: Yes 1: No

NOTE:

• Selector 1 takes effect only in models/versions having a TEL key.

• Selector 4 is applicable only to the U.S.A. versions.

l Selector 2: Ringer OFF setting

This selector determines whether or not the ringer can be set to OFF.

l Selector 4: Detection of distinctive ringing pattern

If this selector is set to "1," the machine detects only the number of rings; if it is set to "0," the

machine detects the number of rings and the ringing time length to compare the detected

ringing pattern with the registered distinctive one.