Service manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-82
3.30 Reversing Release Solenoid (MFC-8820D/8820DN, DCP-8025D/8025DN only)
(1) Remove the two bind B M4x12 Taptite screws, and then remove the PCP case.
(2) Remove the two bind B M4x12 Taptite screws, and then remove the eject gear frame unit.
Fig. 4-143
(3) Remove the switch arm return spring and sector gear spring.
(4) Remove the idle gear and switch arm ASSY.
(5) Remove the reversing sector gear and release solenoid lever.
(6) Remove the bind B M3x4 Taptite screw, and then remove the reversing release solenoid
and solenoid release spring.
Fig. 4-144
Taptite, bind B
M4x12
PCP case
Taptite, bind B M4x12
Eject gear frame unit
Switch arm return spring
Solenoid release spring
Frame L
Idle gear
Hooks
Sector gear spring
Release solenoid lever
Reversing release solenoid
Switch arm ASSY
Reversing sector gear
Hook
Eject gear frame
Taptite, bind B M3x4
Gear A
Gear B