Service manual

MFC-8420/8820D/8820DN, DCP-8020/8025D/8025DN
SERVICE MANUAL
4-75
(21) Remove the hook of the bearing 5, and then slide the feed roller ASSY in the direction of
the arrow.
(22) Remove the feed roller ASSY.
(23) Remove the joint 5 and the bearing 5 from the feed roller ASSY.
Fig. 4-132
NOTE:
Be careful that the different direction installation causes jam when you install joint 5.
Fig. 4-133
Bearing 5
Joint 5
Feed roller ASSY
Hook
1
2
3
4
5
Bearing 5
Joint 5