Service manual

MFC-8420/8820D/8820DN, DCP-8020/8025D/8025DN
SERVICE MANUAL
4-51
(15) Remove the cup S M3x6 Tite screws, and then remove the MP gear cover.
(16) Remove the MP roller cover.
(17) Remove the MP-PE sensor PCB ASSY.
Fig. 4-89
3.18 Rear Cover Sensor
(1) Disconnect the connector, and then remove the rear cover sensor.
Fig. 4-90
MP-PE sensor PCB ASSY
Hook (pin)
Hook
Hooks
Rear cover sensor
Connector
Hook
MP chute ASSY
Tite, cup S M3x6
MP gear cover
Hook (pin)
MP roller cover
Hook