Service manual

MFC-8420/8820D/8820DN, DCP-8020/8025D/8025DN
SERVICE MANUAL
4-31
(13) Remove the cup B M3x8 Taptite screw, and then remove the FFC plate.
(14) Remove the sponge and FFC cable ASSY.
Fig. 4-52
(15) Remove the cup S M3x6 Taptite screw, and then remove the ground wire.
(16) Remove the four pan B M3x8 Taptite screws, and then remove the drive plate ASSY.
(17) Remove the HP sensor, and then disconnect the connector.
Fig. 4-53
FFC plate
FFC cable ASSY
Taptite, cup S M3x6
Scanner base
Sponge
Hook
Taptite, cup B M3x8
Pin
Ground wire
Taptite, pan B M3x8
Taptite, pan B
M3x8
Drive plate ASSY
Connector
HP sensor
Scanner base