Service manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-24
(19) Remove the cup S M3x6 Taptite screw, and then remove the ADF relay PCB ASSY.
(20) Remove the three cup S M3x6 Taptite screws, and then remove the motor frame ASSY.
(21) Remove the two pan (S/P washer) M3x8 screws, and then remove the ADF motor.
Fig. 4-40
(22) Remove the four cup B M3x10 Taptite screws, and then remove the paper feed chute
ASSY.
Fig. 4-41
A
DF chute ASSY
Taptite, cup S M3x6
A
DF relay PCB ASSY
A
DF moto
r
Pan (S/P washer)
M3x8
Taptite, cup S M3x6
Motor frame ASSY
Taptite, cup B M3x10
Taptite, cup B M3x10
Paper feed chute ASSY
PF roller holder ASSY
Taptite, cup S M3x6