Service manual

MFC-8420/8820D/8820DN, DCP-8020/8025D/8025DN
SERVICE MANUAL
4-23
(14) Disconnect the four connectors.
(15) Remove the cup S M3x6 Taptite screw, and then remove the ground wire.
(16) Remove the four cup B M3x10 Taptite screws, and then remove the ADF chute ASSY.
Fig. 4-38
(17) Remove the conductive bushing, and then remove the PF roller holder ASSY.
(18) Remove the conductive bushing, and then remove the LF roller 1 ASSY.
Fig. 4-39
Document cover LGL
Taptite, cup B M3x10
Taptite, cup B M3x10
A
DF chute ASSY
Conductive bushings
LF roller 1 ASSY
PF roller holder ASSY
A
DF chute ASSY
Conductive bushing
A
DF moto
r
A
DF relay PCB ASSY
Taptite, cup S M3x6
Ground wire
Connector
Connector
2
1
1