Owner's Manual

72
55
Settings and Daily Care Settings and Daily Care
Configuring the time and date
When the power is turned on for the first time after purchase, the time and date start from 1/1/
2009 00:00:00 (Default).
The time stops and returns to default settings when the battery runs out or when the battery is removed.
 Configuration Method
1 Display the [Change settings] screen.
• Refer to "Displaying the [Change settings] screen" on page 60 to display the [Change
settings] screen.
2 Select [Time and date].
3 Use the numeric keys and enter the numbers in the order of year, month, date, hour,
and minute.
• The cursor moves as the numbers are entered.
• To make corrections, select [Next], or press or to move the cursor to the
appropriate place, and make your corrections.
• If an invalid number is entered, the status light (orange) flashes.
Set the date between 1/1/2009 and 12/31/2099.
• The accessed date displayed in the SV-Manager displays the time set here. Note
that when the time returns to default settings or is changed, the time may
differ from the actual time.
• The displayed order of this unit's access history is unaffected by changes in
date and time. The files are displayed in order according to the actual
accessed date.