Owner's Manual

Using Scan-to-SV-100B Function

Using Convenient Functions

3 Place the document to be scanned on the multi-function device, and start scanning.

¨The status lamp (center green) flashes, and data is transferred from the multi-function

device to the unit.

• For details, see "Scan to USB (Media)" section in the documentation for the multi-function

device.

• Once scanning starts, a folder named "BROTHER" is created in the root directory of the

unit's memory card. The scanned data is stored in this folder.

¨Once the document transfer is complete, the status lamp (center green) changes to an

illuminated state.

4 Once scanning is complete, disconnect the USB cable from the unit.

¨The [Transfer document] screen is displayed, and the scanned data is converted to the

unit's proprietary file.

• To abort document transfer, select [Cancel]

• The only graphic format supported by the Scan-to-SV-100B function are PDF,

JPEG and TIFF from a Brother multi-function device. Conversion to the unit's

proprietary file is not guaranteed if you manually save the graphic data (PDF, JPEG,

TIFF) via a PC or a non-Brother multi-function device.

• If the graphic format is set to PDF and TIFF on the multi-function device, multiple

pages are converted to one proprietary file.

If the graphic format is set to JPEG on the multi-function device, each page is

converted to one proprietary file.

• With Scan-to-SV-100B function, the optimal scan setting for the multi-function

device is 150 to 200 dpi in color.