Owner's Manual

136
Arranging Embroidery Designs (Layout & Editing)
■ If Cross Stitch (Sepia) is selected
1. Adjust the brightness and contrast of the
image.
The top slider is used to adjust the brightness.
Move the slider to the right to increase the
brightness or to the left to decrease the
brightness. The bottom slider is used to adjust
the contrast. Move the slider to the right to
increase the contrast or to the left to decrease
the contrast.
2. Click Sepia or Gray to select the color tone.
3. Click Next.
4. Specify the sewing attributes and the settings
for creating the embroidery pattern.
5. Click Next.
6. If necessary, edit the stitches.
7. Specify the number of times each stitch is
sewn.
8. After selecting the desired settings, click
Finish.
→ The cross stitch pattern is created and
displayed in the Design Page.
The operations described starting with step 4
are the same as those starting with step 1
when Cross Stitch (Color) is selected.
c
“If Cross Stitch (Color) is selected” on
page 134.
Manually create embroidery patterns
from images (Design Center)
■ If Design Center is selected
→ Design Center starts up, and a Design
Page is displayed with the image
imported into it.
c
“Manually Creating Embroidery Patterns
From Images (Design Center)” on
page 153.