All in One Printer User Manual
Table Of Contents
- NETWORK USER'S GUIDE
- Definitions of warnings, cautions, and notes
- Trademarks
- Compilation and publication notice
- IMPORTANT NOTE:
- Table of Contents
- 1 Internet FAX
- Overview
- 2 Windows® Internet printing
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print Server
- Brother Internet Print: Using the BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 98/98SE/Me/2000/XP/XP Professional x64 Edition
- Adding a Second Brother Internet Port
- Other sources of information
- Internet Printing Installation
- 3 Control panel setup
- A Appendix A
- B Index
Control panel setup
28
3
Restoring the network settings to factory default 3
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
a Make sure the machine is not operating, then disconnect all the cables from the machine (except the
power cable).
b Press Menu, 5, 0.
c Press 1 to select 1.Reset.
d Press 1 to select 1.Yes.
e The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.