All in One Printer User Manual
Table Of Contents
- NETWORK USER'S GUIDE
- Definitions of warnings, cautions, and notes
- Trademarks
- Compilation and publication notice
- IMPORTANT NOTE:
- Table of Contents
- 1 Internet FAX
- Overview
- 2 Windows® Internet printing
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print Server
- Brother Internet Print: Using the BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 98/98SE/Me/2000/XP/XP Professional x64 Edition
- Adding a Second Brother Internet Port
- Other sources of information
- Internet Printing Installation
- 3 Control panel setup
- A Appendix A
- B Index
Control panel setup
24
3
Setup Relay 3
This menu has three selections Rly Broadcast, Relay Domain and Relay Report. For more information on
Relay Broadcast, see Relay Broadcasting on page 5.
Rly Broadcast 3
a Press Menu, 5, 5, 1.
b Press a or b to select On or Off.
c Press OK.
d Press Stop/Exit.
Relay Domain 3
You can register the Domain Names (Max.5) that are allowed to request a Relay Broadcast.
a Press Menu, 5, 5, 2.
b Press a or b to select the Relay Domain (01 - 05).
c Press OK.
d Enter the Relay Domain name for the Domain that is being allowed to request a Relay Broadcast.
e Press OK.
f Press Stop/Exit.
Relay Report 3
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts. When the machine is used with the Brother Network PC Fax software the machine is also acting
as a Relay Station for fax transmissions from the network. This means that a Relay Report can also be printed
for confirmation of sent network faxes. (For US / Canada only)
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: in order to use this function, you must assign the relay domain in the "Trusted Domains" section
of the Relay function settings.
a Press Menu, 5, 5, 3.
b Press a or b to select On or Off.
c Press OK.
d Press Stop/Exit.