Wireless Network Setup Guide

3
For quick and easy instructions on how to set up your wireless network, please follow the steps below.
For more detailed setup procedure, please refer to page 6, and if a connection is not established correctly and
an error message appears, see “Error codes/Error messages” on page 13.
■ Requirements for the wireless network
connection
The wireless network connection complies with IEEE
802.11 n/g/b standards and uses the 2.4 GHz frequency.
The Wireless Network Name (SSID) and Password
(KEY)* for your wireless access point/router are required
to connect your machine to a wireless network.
Find this information and note it first.
Make sure that you have the right password and note
some password are case (upper case & lower case)
sensitive.
* Your network name selection should match the
wireless network that your PC or mobile device is
connected.
a Turn on the machine.
 When the following message appears, touch the
“OK” key.
b Touch or in the home screen.
c Select “ON” for “WLAN Enable”.
d Under “Network” settings screen as shown
below, touch “Setup Wizard”.
 Available Network Name (SSID) will be
displayed.
For step e & f please refer to “Requirements for
the wireless network connection” before step
a.
You'll need your Wireless Network Name (SSID) and
Network Password (Network Key).
e Select your Network Name (SSID), and then
touch the “OK” key.
f Type in the Network Password (Key), and then
touch the “OK” key.
Quick Wireless Network Setup Instructions
Network Name (SSID)
Network Password
(Network Key)