User Manual
Table Of Contents
- Terms of Use
- INTRODUCTION
- IMPORTANT NOTICE
- IMPORTANT SAFETY INSTRUCTIONS
- FEATURES
- Chapter 1 GETTING STARTED
- Chapter 2 BASIC OPERATIONS
- Chapter 3 ADVANCED OPERATIONS
- CUTTING AND EDITING FUNCTIONS
- Pattern Editing Functions
- Pattern Editing Functions - Multiple Patterns
- Mat Layout Screen
- Layout Editing Functions
- Object Editing Screen
- Undoing an Operation
- Grouping/Ungrouping Patterns
- Welding (Merging the Outlines of Multiple Patterns)
- Aligning Patterns
- Auto Layout Functions
- Scanning a Background Image
- Character Input Functions
- MEMORY FUNCTIONS
- Retrieving Embroidery Data for Cutting (Compatible Models Only)
- DRAWING FUNCTIONS
- CUTTING AND EDITING FUNCTIONS
- Chapter 4 SCANNING FUNCTIONS
- Chapter 5 APPENDIX
- INDEX
54
When saving is finished, the following message
appears. For details on checking data saved in
CanvasWorkspace, refer to the Help for
CanvasWorkspace.
d Touch the “OK” key to finish saving the data.
Retrieve Data
a Touch the “Retrieve Data” key in the home
screen to display the retrieve source selection
screen.
b To use the data from a USB flash drive, insert
the USB flash drive into the USB port (for a
USB flash drive) on this machine.
c Touch where you saved the pattern to be
retrieved, and then select the pattern.
a Retrieve from machine's memory key
b Retrieve from USB flash drive key
c Retrieve from CanvasWorkspace key (via a
wireless network connection)
d Retrieve from CanvasWorkspace key (using
a USB cable)
a Retrieve from the machine’s memory.
Touch the pattern to be retrieved and display.
b Retrieve from a USB flash drive.
• If there are folders on the USB flash drive, touch
a folder to display the list of patterns that it
contains.
• If there are many folders or patterns, touch the
arrows keys in the screen to scroll up or down.
Memo
• It may take some time for the USB flash drive to
be detected. Wait 5 to 6 seconds after inserting
the USB flash drive before pressing a key. (The
length of time differs depending on the USB
flash drive.)
• When using a USB flash drive with an access
indicator, wait until the indicator stops flashing.
• If an error is indicated, touch again.
Touch the pattern to be retrieved and display.
Memo
• When retrieving pattern data from the
machine’s memory or a USB flash drive, the
size of the thumbnail previews can be changed.
Touch to display the settings screen, and
then touch or to change the size.
a
c
b
d