User Manual
Table Of Contents
- Terms of Use
- INTRODUCTION
- IMPORTANT NOTICE
- IMPORTANT SAFETY INSTRUCTIONS
- FEATURES
- Chapter 1 GETTING STARTED
- Chapter 2 BASIC OPERATIONS
- Chapter 3 ADVANCED OPERATIONS
- CUTTING AND EDITING FUNCTIONS
- Pattern Editing Functions
- Pattern Editing Functions - Multiple Patterns
- Mat Layout Screen
- Layout Editing Functions
- Object Editing Screen
- Undoing an Operation
- Grouping/Ungrouping Patterns
- Welding (Merging the Outlines of Multiple Patterns)
- Aligning Patterns
- Auto Layout Functions
- Scanning a Background Image
- Character Input Functions
- MEMORY FUNCTIONS
- Retrieving Embroidery Data for Cutting (Compatible Models Only)
- DRAWING FUNCTIONS
- CUTTING AND EDITING FUNCTIONS
- Chapter 4 SCANNING FUNCTIONS
- Chapter 5 APPENDIX
- INDEX
53
3
Patterns and characters arranged in the cutting/
drawing area can be saved and recalled later.
For details on the file formats that can be
imported into the cutting machine from a USB
flash drive or computer, see “Importing
Designs” on page 57.
If the name of the data file/folder cannot be
identified, for example, when the name contains
special characters, the file/folder is not
displayed. If this occurs, change the name of the
file/folder. We recommend using the 26 letters
of the alphabet (uppercase and lowercase), the
numbers 0 through 9, “-” and “_”.
Note
• USB flash drive is widely used, however some
USB flash drive may not be usable with this
machine. Please visit our website
“ http://s.brother/cpoac/ ” for more details.
Saving
Available in the following screen
a Touch the “Save” key to display the file
destination options.
b To save the data on a USB flash drive, insert the
USB flash drive into the USB port (for a USB
flash drive) on this machine.
c Touch the file location to save the file.
a Save to the machine’s memory.
When saving is finished, the following message
and the name of the saved file appear.
b Save to the USB flash drive.
When saving is finished, the following message
and the name of the saved file appear.
• The name of the saved file with the extension
“.fcm” is automatically assigned.
Note
• While data is being saved, do not remove the
USB flash drive.
c Save to CanvasWorkspace.
• In order to save to CanvasWorkspace, the
machine must be connected to a wireless
network. This is available only after a
connection has been established with
CanvasWorkspace. For details on making the
connection, refer to “Wireless Network Setup
Guide”.
• This is a function for transferring data via a
wireless network connection. For details, refer
to “Transferring Data using the Wireless
Network Connection Function” on page 5.
• If in the home screen is blue, the
machine is connected to a wireless network.
MEMORY FUNCTIONS
Mat layout screen
Tutorial 1; Step
f
(page 30)
in “Selecting and Editing the
Second Pattern”
a
c
b