User Manual

36
e Touch the “Object Edit” key.
f Touch to weld the pattern.
• For details on the welding, see “Welding (Merging
the Outlines of Multiple Patterns)” on page 46.
 Touch the “OK” key in the editing screen to
return to the mat layout screen.
g Touch the “OK” key.
hFollow the procedures described in “Loading
the Mat” (page 26) and “Cutting” (page 26) to
load the material to be cut.
 When cutting is finished, a message appears.
i After all pattern pieces have been cut out,
touch the “Finish” key.
 Cutting all the pattern piece within the
same mat
a Select and edit the all pattern pieces, and then
touch the “OK” key.
b Edit the pattern piece using the pattern piece
editing screen.
• For details on the editing functions, see “Editing the
Pattern Piece” on page 41.
c Touch to ungroup the pattern pieces.
After editing is finished, touch the “Set” key.
a Grouping/Ungrouping Key
d Check the pattern piece arrangement using the
mat layout screen and then touch to
arrange all the pattern pieces layout
automatically.
• For details on the auto layout function, see “Auto
Layout Functions” on page 49.
 Touch the “OK” key in the editing screen to
return to the mat layout screen.
a