Operation Manual
Table Of Contents
- Terms of Use
- INTRODUCTION
- IMPORTANT NOTICE
- IMPORTANT SAFETY INSTRUCTIONS
- FEATURES
- Chapter 1 GETTING STARTED
- Chapter 2 BASIC OPERATIONS
- Chapter 3 ADVANCED OPERATIONS
- CUTTING AND EDITING FUNCTIONS
- Pattern Editing Functions
- Pattern Editing Functions - Multiple Patterns
- Mat Layout Screen
- Layout Editing Functions
- Object Editing Screen
- Undoing an Operation
- Grouping/Ungrouping Patterns
- Welding (Merging the Outlines of Multiple Patterns)
- Aligning Patterns
- Auto Layout Functions
- Scanning a Background Image
- Character Input Functions
- MEMORY FUNCTIONS
- Retrieving Embroidery Data for Cutting (Compatible Models Only)
- DRAWING FUNCTIONS
- CUTTING AND EDITING FUNCTIONS
- Chapter 4 SCANNING FUNCTIONS
- Chapter 5 APPENDIX
- INDEX
58
b Start up CanvasWorkspace on a computer.
c Click [Transfer FCM File to ScanNCut DX via
USB Cable…] on the [File] menu to transfer the
FCM file edited in CanvasWorkspace to the
machine.
When the pattern data is saved to the machine,
the following message appears. Click [OK].
Note
• Only one pattern data can be transferred to the
machine. If data had already been transferred
to the machine, it will be overwritten.
d Touch the “Retrieve Data” key to display the
recall source selection screen.
e Select .
The mat layout screen appears.
Importing Designs
■ Importable File Formats
In addition to the FCM format, files in the following
formats can be imported into the machine.
• Embroidery data in PHC/PES format
(compatible models and via USB flash drive
only): For details, see page 59.
• SVG (Scalable Vector Graphics: vector image
format for describing two-dimensional
graphics) format. “.svg” data is displayed in the
pattern list screen by file name (the actual
image cannot be displayed).
Memo
• The imported vector graphics will appear in the
edit screen after they have been converted.
This feature allows you to import only vector
data. Image, text, width of the line, gradient,
opacity, and any other styles or attributes of line
will not be imported.
Retrieve Transferred Patterns from
Artspira (Using a Wireless Network)
The Artspira app can transfer patterns from the app to
the machine via a wireless network connection.
Beforehand, wireless network connection settings
must be specified on the machine and the machine
must be registered. For more information, refer to the
Wireless Network Setup Guide.
If the machine has already been registered with
CanvasWorkspace, you do not need to register it
with the Artspira app.
For more information on the Artspira app, refer to the
Artspira App Quick Guide. (https://s.brother/csyai/)
Memo
• (If your screen has CanvasWorkspace login
button)
Login with the CanvasWorkspace ID and
password.
• (If your screen does not have
CanvasWorkspace login button)
Login with any other ID and set the
CanvasWorkspace linkage in Artspira app
setting screen to inherit the machine
registration setting in CanvasWorkspace.