Operation Manual

7
1
Unit Descriptions - Rear
a USB Port (for a USB flash drive)
Allows a USB flash drive to be connected for saving
and recalling data.
b USB Port (for a computer)
Allows a USB cable to be connected for saving and
recalling data. For Computers and Operating
Systems, see “Connecting Your Machine to the
Computer” on page 57.
c Scanner Glass (inside of machine)
Can be maintained after the rear tray has been
removed. For details, see “Cleaning the Scanner
Glass” on page 92.
d Slot
Allows a mat to be fed back and forth during an
operation. Do not place any objects near the slot that
would prevent the mat from being fed out.
e Rear Tray
Supports the mat when it is fed out of the slot during
operation. Be sure to pull out this tray before using the
machine.
f AC Power Jack
g AC Power Cord
Unit Descriptions - Operation Panel
a LCD Panel
Displays operation screens, preview images of
patterns and error messages.
b Power Button
Turns the machine on/off.
c Power Indicator
Lights up when the machine is turned on, and flashes
when the machine enters the sleep mode (power-
saving mode) or the machine’s software is being
updated.
d Home Button
Displays the home screen (starting screen for
operating this machine).
e Feed Button
Feeds the loaded mat in to or out from the feed slot.
Be sure to press this button to feed the mat when
loading or unloading it.
f Pause/Stop Button
Stops or pauses operation being performed by the
machine.
Included Accessories
For details on the included accessories, refer to the
“Included Accessories” insertion.
a
c
g
d
f f
e
b
a
b
d
f
e
c