Instruction Manual for ScanNCut Link

2
In order to use Brother ScanNCut Link, make the following preparations in advance.
* An Internet connection is required in order to log in to CanvasWorkspace and activate functions.
■ Preparation
● Create a free account in CanvasWorkspace. <http://CanvasWorkspace.Brother.com>
Click [Register] in the login screen, and then follow the on-screen instructions to create an account. If you already have an
account, log in.
● Update the software of the machine to the latest version.
For detailed instructions on updating the machine, refer to the Operation Manual supplied with it.
● Register the machine with CanvasWorkspace.
This operation is required for transferring cutting data to the machine via a wireless network connection. Use your
CanvasWorkspace login ID to log in, and then specify the settings on the machine and in CanvasWorkspace. For details on
specifying the settings, refer to the Wireless Network Setup Guide for the cutting machine.
If you are not transferring cutting data via a wireless network connection, continue with "Activating the function in
CanvasWorkspace".
Activating the Function in CanvasWorkspace
a Log in to CanvasWorkspace. (http://CanvasWorkspace.Brother.com)
Memo
• Activations can be done in either CanvasWorkspace (Win/Mac) or CanvasWorkspace for Web.
b Click in the upper-right corner of the screen.
c Click [Premium Function Activation].
d Type in the activation code on the included activation card, and then click [Activate].
• A connection to the Internet is required for activation.
• The uppercase letters "O" and "I" are not used in the activation code.
• The activation code is valid for only one CanvasWorkspace login ID. The same activation code cannot be used again.
e When the activation confirmation message appears, check the information, and then click [Activate] if it is correct.
f Click [OK] to complete the activation.
Preparation/Setup