Instruction Manual for Rotary Auto Blade Kit

5
Use the rotary auto blade to cut a pattern downloaded from CanvasWorkspace.
Memo
• In order to use the rotary auto blade holder, it is necessary to update the software of the cutting machine to the latest
version (ver.1.60 or later). For details on updating the machine, refer to the Operation Manual supplied with it.
Settings for the Rotary Auto Blade
The settings that take advantage of the special features of the rotary auto blade are described below. To display the
settings screen, either touch in the home screen or select “Cut” in the preview screen, then touch .
■ Cut Mode (Rotary Blade)
■ Blade Adjustment Area (Rotary Blade)
Memo
• When set to “OFF”, the blade moves to the top part of the mat each time automatic blade adjustment is performed.
■ Pattern Interval
Set the pattern interval to “5” to automatically adjust the pattern layout.
Retrieving a Pattern for the Rotary Auto Blade Onto the Machine and Cutting
“Fine”: Fine blade adjustment improves the quality of the cutting results. Cutting will take longer to complete than with the
“Normal” setting.
“Normal”: Cutting is completed faster than with the “Fine” setting. It is best suited for simple patterns.
“ON”: Adjusts the blade in the top part of the mat and inside the adhesive area (on the material).
“OFF”: Adjusts the blade only in the top part of the mat. The specific area is selected with the “Blade Adjustment Area” function.
Set to “OFF” when cutting delicate materials such as lace, silk and satin.