Instruction Manual for Rotary Auto Blade Kit

2
After purchasing this kit, check the contents.
*1 This blade is a consumable. When replacing the blade, purchase the optional accessory “Rotary Auto Blade (CADXBLDR1)”.
To purchase optional accessory, contact the retailer where this kit was purchased.
In CanvasWorkspace (Web), activate the pattern collection for the rotary auto blade, and then download the patterns.
● A pattern for the rotary auto blade cannot be edited in CanvasWorkspace. The pattern can be edited from the
machine.
● In order to activate the pattern collection for the rotary auto blade, your cutting machine must first be registered with
CanvasWorkspace. For details on registering, refer to the Operation Manual supplied with the machine.
● The activation code is valid for only one machine. Once it has been used, it cannot be used with a different
machine.
a Log in to CanvasWorkspace. (http://CanvasWorkspace.Brother.com)
* First-time users should create a free account.
b Click in the upper-right corner of the screen.
c Click [Pattern Collection Activation].
Accessories
AB
Part name
A
Rotary auto blade holder (with blade
*1
installed)
B Activation card for access to 63 rotary auto blade designs
Activating the Pattern Collection in CanvasWorkspace