Instruction Manual for Roll Feeder 2

25
g While squeezing the adjustment lever, slide the right
guide plate.
a Adjustment lever
hRemove the material, making sure that it does not catch
on the pin on the guide plate of the roll holder.
a Pin on guide plate
i Fold down the left and right guide plates on the roll
holder.
a Guide plate
j Lift up the roll holder to remove the hooks on the roll
holder from the holes in the front cover.
a Hooks on roll holder
b Holes in front tray cover
k Stack the base attachment, roll holder and trimmer to
store them.
• When carrying the roll holder, firmly support it from the
bottom with both hands.
a Base attachment
b Roll holder
c Trimmer
Note
• Make sure not to bend the material support sheet when
placing the base attachment onto the roll holder.
1
1
a
a
1
2
1
2
3