Instruction Manual for Paper Piercing Starter Kit
Table Of Contents
- About the Paper Piercing Starter Kit
- Important Safety Instructions
- Precautions
- Accessories
- Activating the Paper Piercing Function on the Machine
- Activating Paper Piercing Patterns in CanvasWorkspace
- Preparing Paper Piercing Data in CanvasWorkspace
- Retrieving a Pattern From CanvasWorkspace to the Cutting Machine and Paper Piercing the Material
- Selecting a Built-In Pattern and Perform Paper Piercing
- Maintenance
- [Example] Creating a Project with Two Tools of Different Diameters
- TROUBLESHOOTING
- Error Messages
4
Selecting an Activated Paper Piercing Pattern
a In the object panel, select (Piercing).
A list of paper piercing patterns appears.
b Select the desired pattern, and then drag it into the editing area.
• The selected pattern can also be added to the editing area by clicking the pattern in the list.
• Activated paper piercing patterns cannot be enlarged or reduced.
c Use the desired method from the [File] menu to transfer the pattern to the cutting machine. For details on the transfer
methods, refer to the Brother Solutions Center (http://s.brother/cfrab/).
a Transferring using a USB flash drive
Save the FCM file to a USB flash drive, and then transfer the file to the cutting machine.
b Transferring via a wireless network connection
Specify the wireless network settings on the cutting machine, and then transfer the FCM file.
c Transferring using a USB cable (compatible only with Windows)
Connect the USB cable to the cutting machine and computer, and then transfer the FCM file.
Preparing Paper Piercing Data in CanvasWorkspace
a
b
1
2
3