Instruction Manual for Paper Piercing Starter Kit
Table Of Contents
- About the Paper Piercing Starter Kit
- Important Safety Instructions
- Precautions
- Accessories
- Activating the Paper Piercing Function on the Machine
- Activating Paper Piercing Patterns in CanvasWorkspace
- Preparing Paper Piercing Data in CanvasWorkspace
- Retrieving a Pattern From CanvasWorkspace to the Cutting Machine and Paper Piercing the Material
- Selecting a Built-In Pattern and Perform Paper Piercing
- Maintenance
- [Example] Creating a Project with Two Tools of Different Diameters
- TROUBLESHOOTING
- Error Messages
3
CanvasWorkspace has a large variety of paper piercing patterns that can be used immediately. In addition, you can create original
patterns or edit existing ones.
● CanvasWorkspace (Windows/Mac) (ver. 2.2.0 or later) must be installed on your computer. The latest version of the application
can be downloaded from the Brother Solutions Center (http://s.brother/caraa/).
● In order to use CanvasWorkspace, a CanvasWorkspace login ID is required. If you do not have a free account, click [Create New
Account] in the screen that appears after installation, and then follow the on-screen instructions to create an account.
● If CanvasWorkspace is already installed on your computer and you want to update it to the latest version, select [Check for
CanvasWorkspace Update…] from CanvasWorkspace’s [Help] menu, and then update it according to the on-screen instructions.
● The Paper Piercing kit is not compatible with CanvasWorkspace (Web).
a Start up CanvasWorkspace.
b In CanvasWorkspace, select [Account Settings...] from the [Help] menu.
c Click [Premium Function Activation].
d Type in the activation code on the included activation card, and then click [Activate].
• A connection to the Internet is required for activation.
• The uppercase letters “O” and “I” are not used in the activation code.
• The activation code is valid for only one CanvasWorkspace login ID. The same activation code cannot be used again.
e When the activation confirmation message appears, check the information, and then click [Activate] if it is correct.
Click [OK] to complete the activation.
Activating Paper Piercing Patterns in CanvasWorkspace