Instruction Manual for Paper Piercing Starter Kit
Table Of Contents
- About the Paper Piercing Starter Kit
- Important Safety Instructions
- Precautions
- Accessories
- Activating the Paper Piercing Function on the Machine
- Activating Paper Piercing Patterns in CanvasWorkspace
- Preparing Paper Piercing Data in CanvasWorkspace
- Retrieving a Pattern From CanvasWorkspace to the Cutting Machine and Paper Piercing the Material
- Selecting a Built-In Pattern and Perform Paper Piercing
- Maintenance
- [Example] Creating a Project with Two Tools of Different Diameters
- TROUBLESHOOTING
- Error Messages
2
After purchasing this kit, check the contents.
*1 These accessories are consumables. After you have used them up, purchase a paper piercing mat (CADXPPMAT1) or paper piercing tools
(CADXPPTL1). To purchase options, contact the retailer where this kit was purchased.
a Touch “Premium Functions” in the settings screen.
b Select “ON” beside “Kit Activation (Paper Piercing)”.
Accessories
ABC
D
E
F
Part Name
A
Paper piercing mat 12" × 12" (305 mm × 305 mm)
*1
B Paper piercing tool holder
C
Paper piercing tools (diameter 0.4 mm and 0.8 mm)
*1
D Activation card for access to 30 paper piercing patterns
E Sample card 5" × 7" (127 mm × 178 mm)
F Envelope for sample card 5.2" × 7.2" (133 mm × 184 mm)
Activating the Paper Piercing Function on the Machine