Instruction Manual for Disney Vinyl Auto Blade Kit

8
The Tiling function automatically splits cutting data larger than the mat size to fit within the specified size so that it can be transferred
to the machine. This function allows you to create larger projects by joining together the cutouts from the tiled data.
Memo
• Data created using the Tiling function can be transferred to the machine only by using a USB flash drive.
• The Tiling function cannot be used with Disney patterns, patterns containing rhinestone data or paper piercing data as well as data
containing registration marks.
Tiling Large Cutting Data
In this example, a built-in logo and border pattern will be enlarged, then split into six 12-inch sections.
a Click (Artboard) on the right side of the screen.
 The [Artboard] Panel appears in the Control Panel.
b Select [Custom Size (For Tiling)] under [Artboard Size], and then type in the desired size of your project.
Memo
• The values that can be specified for the custom size are 304.9 mm (12") to 1498.6 mm (59") for the width and 304.9 mm (12") to 1778
mm (70") for the height.
c After placing your favorite pattern in the drawing area, select [Tiling...] from the [Premium] menu.
 The tiling settings dialog box appears.
About the Tiling Function