Instruction Manual for Disney Vinyl Auto Blade Kit

7
■ [Specify the Spacing from the Selected Object]
■ [Specify the Rectangle Size]
 After specifying the settings, click [OK].
d Click [Export/Transfer FCM File] on the [File] menu.
e Use the desired method from the screen that appeared to transfer the cutting data to the cutting machine. For details on the
transfer methods, refer to the Brother support website (http://s.brother/cfrab/).
a Transferring using a USB flash drive
Save the FCM file to a USB flash drive, and then transfer the file to the cutting machine.
b Transferring via a wireless network connection
Specify the wireless network settings on the cutting machine, and then transfer the FCM file.
c Transferring using a USB cable (compatible only with 64-bit version of Windows)
Connect the USB cable to the cutting machine and computer, and then directly transfer the FCM file.
Memo
• Weeding boxes and weeding lines cannot be edited after the data has been transferred to the cutting machine.
1
2
3