Instruction Manual for Disney Vinyl Auto Blade Kit

5
Weeding is the process of removing the unnecessary parts around a cut pattern to leave the desired parts on the backing paper or
backing film.
By using the Weeding Box function, a box around patterns (weeding box) or line between patterns (weeding line) can be cut, making
it easier to peel off unnecessary parts.
The following shows the difference between weeding with and without a weeding box or weeding lines.
● Without a weeding box
When peeling off large unnecessary parts, they stick to each other or to the desired parts, making weeding difficult.
● With a weeding box
Cutting a weeding box breaks up unnecessary parts into smaller parts, making weeding easier.
Memo
• The Weeding Box function in CanvasWorkspace cannot be used with Disney patterns. To add a weeding box, use the Weeding Box
function on the machine. For details, refer to "Notification about the updated operational features of version 1.5" for the cutting
machine which can be downloaded from http://s.brother/cmoae/
• A weeding box has already been added to some of the patterns that were added after the function was activated. For details on the
relevant patterns, refer to the included pattern list.
About the Weeding Box Function
Weeding box
Weeding line