Instruction Manual for Disney Vinyl Auto Blade Kit

15
Iron-On Transfer Material
Iron-on transfer material is used for heat transferring patterns onto fabric such as T-shirts and sweatshirts. The material consists of two
layers: a thermo-softening adhesive sheet and carrier sheet (paper or film). After using the cutting machine to cut out your pattern,
such as text or a logo, from only the thermo-softening adhesive sheet, attach the pattern to the target surface by pressing down on the
backing with a heat press or iron.
* Please refer to the manufacturer's instructions included with the iron-on transfer material.
Applying the Iron-On Transfer Material to the Surface
*1
When loading a roll of iron-on transfer sheet material into a cutting machine installed with the roll feeder, make sure that the
material is correctly oriented. For details, refer to the Instruction manual for Roll Feeder.
*2
First check that an iron-on transfer can be applied to the target surface.
*3
The heat transfer conditions (temperature, pressing time, etc.) differ depending on the material being used. Use the material
according to the manual included with it.
Create your pattern in
CanvasWorkspace.
Make sure that the pattern is
flipped to create a mirror image.
Half-cut the desired pattern with
the cutting machine. (
*1
)
Peel off any excess, leaving only the pattern on the backing. (Weeding)
With the backing facing up, place
the sheet cut in step
3 onto the
target surface such as fabric (
*2
).
Transfer the pattern with a heat
press or iron. (
*3
)
Peel off only the backing.
1
2
3
4
5
6