Instruction Manual for Disney Vinyl Auto Blade Kit

14
Examples of Materials That Can Be Used
Adhesive craft vinyl
This adhesive-backed sheet material is used to decorate signboards, window glass, walls or vehicles. The material consists of two
layers: an adhesive-backed sheet and backing (paper or film). After using the cutting machine to cut out your pattern, such as text or
a logo, from only the adhesive-backed layer, attach the pattern directly onto the wall, vehicle or other surface.
* Test a small area on the surface before adhering the adhesive craft vinyl to avoid damage.
Applying the Adhesive Craft Vinyl to the Surface
*1
The application sheet (also called a transfer paper or retack sheet) is a low-tack sheet used for attaching the adhesive craft vinyl to
the target surface. Use this sheet together with adhesive craft vinyl.
*2
Use the scraper (CASCP1) or brayer (CABRY1) for attaching the application sheet and for transferring the adhesive craft vinyl
cutouts to the target surface. To purchase a scraper (CASCP1) or brayer (CABRY1), contact the retailer where this product was
purchased.
Useful Information
Half-cut the desired pattern with
the cutting machine.
Peel off any excess, leaving only the pattern on the backing. (Weeding)
Attach the application sheet
*1
to
the area of the backing where the
pattern remains. (
*2
)
Transfer the cut-out patterns to the
application sheet so that they
remain correctly arranged.
After wiping the target surface
clean, attach the adhesive craft
vinyl cutouts with the application
sheet. (
*2
)
Finally, peel off only the application
sheet.
1
2
3
4
5
6